CLOSED TILE REGULATOR

With the RUBI Tile Regulator, the professional ceramic tile installer will be able to quickly and precisely adjust the laying joint generated when installing the piece, both in wall coverings and on flooring. The RUBI Tile Regulator is specially designed for works with porcelain sheets and large-format tiles. These large-volume materials are very difficult to adjust once they have been laid. The strength of the double-glue adhesion generates a lot of resistance and the user must exert great effort and risk the possibility of damaging the material. To facilitate this process, RUBI makes the Tile Regulator available to professionals. Equipped with two 150 mm diameter vacuum suction cups and suitable for a wide variety of surface finishes. The Regulator is fixed to two different pieces, the one that has just been installed and to another previously installed one. Once the suction cups are attached to both pieces, we can adjust the size of the placement joint from 0 to 1.5 inches maximum. The tile regulator also allows you to adjust the horizontal level of the pieces from 0 to 0.78 inches and in pieces up to a maximum weight of (100 kg). It is important to remember that the tile regulator does not replace, in any case, the use of crossheads or leveling systems, since this tool is designed so that the small adjustments that, in tiles of more manipulable formats, would be made manually can be executed easily and quickly, and with the least effort for the professional ceramic tile installer. For cases in which it is necessary to work with very large formats, it is always recommended to use two tile regulators. This way, a much faster and more precise adjustment of the installed part will be obtained.